+91 9819522000

Gas & flame Detection

gas detector & controllers

MX 32 analog and digital controller

  • Analog and digital controller
  • 1 or 2 channels, up to 8 detectors
  • Fully scalable
  • 5” LCD back-lit graphic display
  • Five programmable events per detector
  • Smart keys make embedded multi-language menus simple to use

MX 43 SIL-1 Certified Gas Detection Controller

  • Analog and digital controller
  • 4 or 8 lines, up to 32 detectors
  • Up to 32 fully programmable relays (OR, AND, NAND, NOR, Voting functions)
  • Large graphic display
  • Remote modules (cost savings on wiring installation)
  • USB Data logging capability
  • RS485 Modbus RTU and multiple analog outputs
  • SIL-1 Certified to IEC/EN 61508 and EN 50402 functional safety standards

MX 62

  • SIL3 and SIL2 according to EN50402:2006 and IEC61508:2011
  • Up to 64 secured channels for direct or network wiring
  • Direct network and loop connection
  • Redundancy from measurement to alarm relays
  • Functions AND, OR, MIN, MAX, Votingt

OLCT 10 - OLC 10

  • 4-20 mA output analog transmitter without display
  • Available with catalytic bead, electrochemical or semi-conductor sensor
  • Detects combustible, toxic and refrigerant gases (CO, NO, NO2, Methane, Propane, Butane, Hydrogen, LPG, NGV and freons) - EN 14624 compliant with regards to R134a monitoring
  • For commercial use (boiler rooms, hospitals, carparks, etc.)
  • ATEX 3G certified for use in zone 2 (except semi-conductor version)

OLCT 10N Combustible Gas Detector

  • Digital transmitter without display
  • Available with catalytic bead or electrochemical sensors
  • Detects O2, combustible gas, and toxic gases
  • Available for detection of O2, CO2, H2S, NH3, NO, NO2, Methane, Propane, Butane and Hydrogen
  • For commercial and light industrial applications (laboratories, cooling rooms, hospitals, boiler rooms, waste water treatment plants, etc.)
  • ATEX 3G certified for use in zone 2
  • For use only with the MX43 controller

Toxic and Combustible Gas Detector

OLCT 100 - OLC 100

  • 4-20 mA analog transmitter without display
  • SIL2 capability for LEL, O2, CO, H2S, NH3, CO2
  • Detects combustible, toxic or refrigerant gases and O2
  • Available with electrochemical, infrared or semi-conductor sensors
  • Designed for industrial applications
  • Available in explosion-proof or intrinsically safe versions, and stainless steel
  • A high-temperature version allows operation up to 200°C
+91 9819522000

OLCT 20 - OLC 20

  • Designed for indoor or outdoor monitoring
  • Complete reliability
  • SIL2 suitable for combustible gases and O2
  • Can be fitted on a housing with a M25 or 3/4” NPT thread
  • Stainless steel detector provides protection and resistance to corrosive agents
  • The precalibrated sensors can be disconnected by turning the head of the unit

OLCT 60

  • 4-20 mA analog transmitter with display
  • SIL2 capability for combustible gases
  • Detects O2, combustible, toxic and refrigerant gases
  • Corrosion resistant
  • Designed for industrial applications
  • Available with remote sensor head, flameproof or intrinsic safety versions
  • Non-intrusive, one-man calibration
  • New XP IR infrared sensor for combustible gases or CO2

OLCT 80/OLCT 80 Wireless

  • Frequency 2.4 GHz (EU) / 900 MHz (USA)
  • Low Power Requirement
  • Up to 3 km Line-of-Sight Range
  • Robust Mesh Network Topologyt
  • Up to 49 devices per network
  • Flexible Input/Output options(analog, on/off, Modbus RS485)

iTrans2 Gas Sensor

  • Detects Explosive and Toxic Gas, or Oxygen
  • Non-Intrusive Calibration
  • Smart Infrared Gas Sensors
  • HART Communication Protocol (NEW)
  • MODBUS Communication
  • Programmable Relays
  • Dual Gas Sensing

(*) versions with local visible alarm are to be installed in ordinary locations only

Series 700 Fixed Gas Detectors

  • Water-Proof
  • Corrosion-Proof
  • Vibration-Proof
  • Multi-Layer Surge Protection
  • Up tPre-emptive Fault Diagnostics

The GD10 Series

  • Life-safety performance approved; ATEX & CSA
  • 15 year warranty IR sources - solid state optics
  • No field recalibration
  • Dual skin weather protector – no filters / gauzes or sinters
  • Planned maintenance with HART
  • SIL 2/3 certified

GD1 Toxic Gas Laser Detector

The GD1 has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from offshore production facilities to wastewater treatment plants.



Contact Info

1101, 11th floor Technocity
IT Premises co-op Society,
Sector X-5/3, TTC Industrial Area,
Mahape Navi Mumbai 400710


All Rights Reserved By Intech Fire & Security Pvt Ltd.

Designed By Mirackle Solutions